UltraThin eco+ MYSTIC WHITE 315°

Our UltraThin eco+ product line is especially suitable for demanding interior shapes. Whether curves, edges, furniture, doors, columns or custom design objects – this extremely flexible stone veneer makes a genuine natural stone surface possible even where standard stone veneer reaches its limits. UltraThin eco+ is not suitable for wet areas.

Key facts for UltraThin eco+
► 100% natural stone surface
► Total thickness of less than 1 mm / 1/25 in
► Extremely flexible, foldable and bendable
► Very lightweight: approx. 0.8 kg/m² / approx. 0.16 lb/ft²
► Easy to cut with scissors or a utility knife
► For interior use, not suitable for wet areas

Slate-Lite is made from layered stone. Colour variations in the individual sheets, quartz veins running through the stone, natural cracks or slight chipping may occur.

This is not a defect, but rather a characteristic of the genuine natural stone surface and makes every Slate-Lite stone sheet completely unique.

Multicolour slates generally have a slightly softer stone surface and impress with their rich colours as well as constantly changing patterns and structures.

Mica slates usually have a somewhat rougher surface with more homogeneous patterns. A special eye-catcher is the shimmering effect created by the natural quartzite content in the stone.

Limestones impress with a smoother surface and relatively homogeneous patterns and structures.

Sandstones are characterised by a slightly rough, somewhat grainy surface, including minor height variations and, in some areas, small raised sections with greater overall thickness.

Marbles have a split-rough surface with strong veining and raised surface structures. Constantly changing patterns and partial structures with greater overall thickness create an exciting overall appearance.

Mystic White 315° is a marble.

Please note that the material images shown here are only examples of this decor. Every Slate-Lite stone sheet is unique and may differ from the images shown here.

With our optional Photo Matching Service, you will receive a photo of the selected material batch after placing your order. You can simply approve it if you like it, or we will send you an alternative batch.

This gives you full control over the appearance of your delivered stone veneers, despite the 100% natural stone surface with its varying colours and structures from sheet to sheet.

(This service is currently not available for the 30 x 60 cm formats or our brick slips.)

The basic installation of UltraThin eco+ involves just a few simple steps:

1. Lay UltraThin eco+ completely flat and check it for faults, defects or damage before installation.
2. If required, cut UltraThin eco+ with scissors or a utility knife.
3. For curves, edges or three-dimensional shapes, carefully shape the material using heat from approx. 40°C / 104 °F.
4. Apply a suitable adhesive across the entire back of the stone sheet or onto the substrate.
5. Position UltraThin eco+ in the desired place and press it down with light, even pressure.
6. Only apply impregnation or sealing after bonding, so that the protective layer does not crack during shaping.

For detailed installation instructions, please download the guide including the data sheet below.